Original Feed - Gestetner A294 Service Manual

DOCUMENT FEEDER

2.1.4 ORIGINAL FEED

[B]
When the leading edge of the original turns the entrance sensor [A] on, the feed-in
clutch [B] turns off and the drive for the feed belt is released. The original is fed by
the transport rollers [C].
At the same time, the pick-up motor starts again and the pick-up roller [D] is lifted
up. When the pick-up roller HP sensor turns on, the pick-up motor stops (see Pick-
up Roller Release).
A294/A295
CÓPIA NÃO CONTROLADA
[A]
[C]
2-4
CÓPIA NÃO CONTROLADA
[D]
B301D109.WMF
SM