Controller Functions; Meter-Charge Mode; Meter-Charge Counter Display; Pm Warning Display - Gestetner G056 Service Manual

CONTROLLER FUNCTIONS

6.6 CONTROLLER FUNCTIONS

6.6.1 METER-CHARGE MODE

Meter-charge Counter Display

When the meter-charge mode (printer engine service mode) is switched on, the
meter-charge counter menu is the first item shown on the user menu.
(The "Sample Print" menu appears first when the meter-
charge mode is switched off.)

PM Warning Display

When the meter-charge mode (printer engine service mode) is switched on,
"Replace Maintenance Kit" will not be displayed at 90k prints.
NOTE: The default setting for this machine is meter-charge mode off.
Item
Meter-charge
counter
PM Warning
PM
PM Counter
The meter-charge counter is not the same as the PM counter. This is because, in
the following cases, the meter-charge counter does not count up.
• Blank rear side during duplex printing
• Blank page when using the "Cover Page" or "Two in One" features
• Service reports
NOTE: The meter-charge counter cannot be reset.

6.6.2 SAMPLE PRINT

This feature is formally known as "Proof Print". This function gives users a chance
to check the print results before starting a multiple-set print run.
• The size of the hard disk partition for the sample print feature is 5.4 GB. This
partition is also used by the collation and locked print features.
• The partition can hold up to 30 files, including files stored using locked print.
• The maximum number of pages is 1,000, including jobs using locked print and
collation.
NOTE: Sample print requires the installation of an optional hard disk.
G056/G058
Meter-charge On
Shown as the first
item in the user menu
Not shown
Service
Reset manually
6-28
Menu:
Meter-charge Off
Not shown
"Replace Maintenance
Kit" displayed at 90k
prints
Customer
Automatically reset
when the fusing unit is
replaced using the
maintenance kit
Counter
Remarks
User menu
Printer engine
service mode "PM
counter"
SM