Table of Contents
Advertisement
Illuminator Wi
lamp, handle it through a piece of cloth or through its packaging
until replacement is complete. If you get fingerprints on the lamp,
wipe gently with a piece of clean cloth dampened with alcohol.
A Attaching to the stand
Clamp knob
illumination by using the Epi arm.
clamps two
arms/joints.
.
© Slightly loosen the clamp knob on the Epi
Arm |
arm.
Screw in the mounting screw at the end
_ of the Epi arm into the screw hole for
mounting accessories on the stand base while
` turning the joint. Next, securely tighten the
nut using the supplied wrench. Then, screw
a
NL,
-| the mounting screw at the other end of the Epi
sh
1
= arm into the screw hole on the illuminator in
ea: N : La
=z
the same manner as described above. The
aa
© illustration shows the example of C-DSLS.
Advertisement
Table of Contents
