Coolcube Ii Circulator; C- To Spectroscopy-Mount Adapter; Adjustable C- To Spectroscopy-Mount Adapter - Princeton Instruments ProEM+ EMCCD User Manual

22
performance wavelength calibration software available, providing up to 10X greater
accuracy across the entire focal plane than competing routines.
PICam™: The standard 64-bit software interface for cooled CCD cameras from
Princeton Instruments. PICam is an ANSI C library of camera control and data
acquisition functions. Currently, the interface supports Windows Vista and Windows 7.
Scientific Imaging ToolKit™: SITK™ is a collection of LabVIEW
scientific cameras and spectrographs. This third party software can be purchased
from Princeton Instruments.
Note: ProEM+ may also be operated by several other third-party software packages.
Please check with the providers of the packages for compatibility and support
information.
CoolCUBE
In addition to using an internal fan to remove heat, ProEM+ cameras also incorporate
a closed loop system for circulating fluid. The CoolCUBE
continuously pumps the 50:50 mixture of room temperature (23ºC) water and
ethylene glycol. To prevent voiding the warranty, use only the circulator and hoses
shipped with your system.

C- to Spectroscopy-Mount Adapter

A C-mount to Spectroscopy-mount adapter can be ordered separately.

Adjustable C- to Spectroscopy-Mount Adapter

An adjustable C- to Spectroscopy-mount adapter can be ordered separately.
®
ProEM + System Manual
Circulator
II
Version 1.B
®
VIs for
circulator unit
II