Princeton Instruments ProEM+ EMCCD User Manual page 103

102
11. To further reduce the readout
12. Acquire a spectrum.
13. Select Readout Time from
Note: Entering 0 for the Pre- and Post-Dummies and skipping the serial register clean
means that there will be some spectral artifacts in the data.
ProEM
time, open the Hardware
Setup|Camera/Controller
tab, set shutter compensation
time(s) to 0 and on the
Hardware Setup|Custom
Camera tab, select Skip
Serial Register Clean .
the Acquisition menu. The
readout time is reported on the
Readout Time dialog as
0.47 ms.
®
+ System Manual Version 1.B