Princeton Instruments ProEM+ EMCCD User Manual page 3

Copyright 2012-2013 Princeton Instruments, a division of Roper Scientific, Inc.
All rights reserved. No part of this publication may be reproduced by any means without the written permission
of Princeton Instruments, a division of Roper Scientific, Inc. ("Princeton Instruments").
Printed in the United States of America.
BASE, IntelliCal, OptiCAL, PICam, PINS, and Unichrome are trademarks of Roper Scientific, Inc.
eXcelon, LightField, ProEM, and PVCAM are registered trademarks of Roper Scientific, Inc.
Intel is a registered trademark of Intel Corporation or its subsidiaries in the United States and other countries.
LabVIEW is a registered trademark of National Instruments, Inc.
LEMO is a registered trademark of INTERLEMO HOLDING SA
Scientific Imaging ToolKit and SITK are trademarks of R Cubed Software Consultants, LLC.
Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and/or
other countries.
The information in this publication is believed to be accurate as of the publication release date. However,
Princeton Instruments does not assume any responsibility for any consequences including any damages
resulting from the use thereof. The information contained herein is subject to change without notice. Revision of
this publication may be issued to incorporate such change.
3660 Quakerbridge Rd
Trenton, NJ 08619
TEL: 1-800-874-9789 / 1-609-587-9797
FAX: 1-609-587-1970