Sorted Copy Tray; Horizontal Transport Unit - Develop ineo 250 Service Manual Field

Field Service Ver. 1.0 Aug. 2005
4.3.9

Sorted Copy Tray

NOTE
• When removing the Sorted Copy Tray, set the Sorted Copy Tray to its home posi-
tion.
• If the Exit Tray (OT-601) is installed, remove it in advance.
[1]
[3]
[4]
[6]
[5]
4.3.10

Horizontal Transport Unit

[2]
1. Open the Front Door.
[2]
2. Remove the screw [1], and remove
the Front Door Stopper [2].
3. Remove the Horizontal Transport
Left Front Cover.
13
4349F2C507DA
4. Disconnect three connectors [3].
[3]
5. Remove two screws [4], and remove
the ground wire.
4349F2C509DA
6. Remove six screws [5], and lift the
Sorted Copy Tray [6] upward and off
the copier.
[5]
4349F2C510DA
1. Remove the Sorted Copy Tray.
15
2. Remove the Front Right Door.
13
3. While holding down the lock release
button [1], remove the Horizontal
[1]
Transport Unit [2].
4349F2C511DA
4. Other
15