Settings In The System Input; Machine Configuration; Settings In The Counter; Checking The Counter Reading - Develop ineo 250 Service Manual Field

9. Tech. Rep. Mode
9.4

Settings in the System Input

9.4.1

Machine Configuration

Functions • Displays the machine configuration status.
Use • The machine configuration status is displayed as Yes or No.
Setting/ 1. Call the Tech. Rep. Mode to the screen.
Procedure 2. Touch [System Input] and [Machine Configuration], in that order.
9.5

Settings in the Counter

9.5.1

Checking the counter reading

1. Call the Tech. Rep. Mode to the screen.
2. Touch the [Counter].
3. Touch [Check] and the specific counter key whose reading is to be checked.
9.5.2

Clearing readings of all counters at once

1. Call the Tech. Rep. Mode to the screen.
2. Touch the [Counter].
3. Touch the [Counter Reset].
4. Touch the counter keys to be cleared and then touch [OK].
9.5.3

Clearing the reading of a specific counter

1. Call the Tech. Rep. Mode to the screen.
2. Touch the [Counter].
3. Touch the specific counter key to be cleared and press the Clear key.
If the reading of a wrong counter key has been cleared, press the Interrupt key to undo
the clearing operation.
9.5.4

Application Counter

Functions • To display or clear the readings of application counters.
Use • Copy: Number of copies made
• Printer: Number of printed pages produced via computer
• List Print: Number of printed pages of lists
• Fax Print: Number of printed pages received as fax and mail
• Fax Transmission: Number of pages of fax transmitted
• Mail Transmission: Number of pages transmitted by fax/scanner
Setting/ Checking the counter reading
Procedure 32
Clearing the counter reading (all and a specific one)
32
32
Field Service Ver. 1.0 Aug. 2005