Develop ineo 250 Service Manual Field page 169

9. Utility/Counter Mode
9.5.4 Call Remote Center
Functions
• To call the CS Remote Care Center from the Administrator, When the CS Remote Care
setup is complete.
Use
Setting/ 1. Touch and highlight [Call Remote Center].
Procedure 2. The highlight display is cancels as soon as the function terminates normally.
9.5.5 Network Setting
A. Basic Settings
(1) DHCP
Functions • To set DHCP for the network.
Use • To use DHCP.
• The default setting is "IP Input".
Setting/
Procedure
(2) IP Address Setting
Functions • To set the IP address of the device used in the network.
• To enter the IP address of the machine.
Use
• Use this function when [IP Input] is selected for [DHCP].
Setting/ • IP address Version 4 format
Procedure [0 to 255] . [0 to 255] . [0 to 255] . [0 to 255]
(3) Subnet Mask
Functions • To set the subnet mask of the device used in the network.
• To enter the subnet mask of the machine.
Use
• Use this function when [IP Input] is selected for [DHCP].
Setting/ • IP address Version 4 format
Procedure [0 to 255] . [0 to 255] . [0 to 255] . [0 to 255]
(4) Gateway
Functions • To set the gateway address of the device used in the network.
• To enter the gateway address of the machine.
Use
• Use this function when [IP Input] is selected for [DHCP].
Setting/ • IP address Version 4 format
Procedure [0 to 255] . [0 to 255] . [0 to 255] . [0 to 255]
(5) Self-Domain Name
Functions • To set the domain name of the local machine.
Use • To enter the domain name of the local machine.
1. Touch the [Self-Domain Name].
Setting/
2. Enter the domain name of the local machine from the 10-Key Pad or the keyboard on
Procedure
the screen and then touch [Enter].
130
Auto-Obtain IP Input
Field Service Ver. 1.0 Aug. 2005