Field Service Ver. 1.0 Aug. 2005
9.5
Settings in the Admin. Management
• The Admin. Management will be available by entering the administrator password (8 dig-
its) set by the Admin. Set. (The administrator password is initially set to "00000000")
9.5.1
Initial Setting
A. Date & Time Setting
(1) Date & Time Setting
Functions
• To set the date and time of day.
Use
• To set or change the date and time of day.
Setting/
• Use the Keypad to type in the date (Month, Day, and Year) and time of the day.
Procedure
• Touching [Enter] will start the clock.
(2) Time Zone
• To set the time difference from the standard time appended to the mail header when
Functions
sending e-mail.
Use
• To change the time difference from the standard time.
• The default setting is "-05:00".
Setting/
Procedure
(3) Day Light Saving Time
Functions
• To adjust daylight saving time automatically.
Use
• To set daylight saving time.
• The default setting is "Auto".
Setting/
Procedure
9.5.2
Admin. Set
A. Administrator Code Input
Functions
• To change the administrator access code.
Use
• To change the administrator access code.
• Setting range: 00000000 to 99999999
Setting/
[Current Code]: Enter the current administrator access code.
Procedure
[New Code]: Enter the new administrator access code.
[Retype New Code]: Enter the new administrator access code again for confirmation.
B. Max. Copy Sets
Functions
• To set whether or not to limit the number of copies to be made at one time.
Use
• To limit the number of copies to be made at one time.
• The default setting is "OFF".
Setting/
Procedure
-12:00 to +12:00
"Auto"
OFF
1 to 99
OFF
9. Utility/Counter Mode
127
Need help?
Do you have a question about the ineo 250 and is the answer not in the manual?