Preparing The Audio Input System; Connecting A Microphone To The Mic In Connector - Sony PXW-X320 Operating Instructions Manual

Preparing the Audio
Input System
Connecting a Microphone to the
MIC IN Connector
Attach the supplied microphone to the
microphone holder of the supplied viewfinder.
1
Loosen the screw and open the
microphone holder clamp.
Microphone holder clamp
2
Place the microphone in the
microphone holder.
1 Place the microphone in the holder so
that "UP" is at the top.
2 Close the microphone holder.
3 Tighten the screw.
On how to perform this operation, refer to the
operation manual for the microphone.
3
Plug the microphone cable into the MIC
IN connector, then set the AUDIO IN
switch for the channel on which you
want to record the audio from this
microphone to FRONT.
4
Secure the microphone cable with the
cable clamp.
39