Logo Capture Menu; Image Source Submenu; Capture Start Submenu - Extron electronics ISS 506 User Manual

Operation, cont'd

Logo Capture menu

Figure 3-11 is a flowchart that shows an overview of the Logo Capture menu, the
submenus, and the available settings. See "Capturing a logo" on page 3-30 for
more details on using this menu.
Default
Cycle
Menu
30 sec.
Auto
Image
Menu
Input
Configuration
Menu
Output
Configuration
Menu
Effects
Configuration
Menu
Logo
Capture
Menu
User
Presets
Menu
Advanced
Configuration
Menu
View Comm
Settings
Menu
Scan Converter
* *
Configuration
Menu
Exit Menu
Press Next
Menu Next
Figure 3-11 — Logo Capture menu flowchart

Image Source submenu

The Image Source submenu displays and allows you to select either the preview
output or the program output as the source of the logo that will be captured.
Rotate either Adjust knob while this submenu is active to select the output as the
source of the logo.

Capture Start submenu

The Capture Start submenu displays and allows you to set the starting point of
the logo to be captured. Use this submenu, along with the Capture Size submenu
to define the area to be saved as a logo. Rotate the Adjust [ knob while this
submenu is active to position a line in the X (horizontal) axis. Rotate the Adjust {
knob to position a line in the Y (vertical) axis. The point where the two lines
intersect is the starting point of the logo.
3-16 ISS 506 Integration Seamless Switcher • Operation
30 sec.
Image Source
< >
Menu Prog Prev
30 sec.
Save Cap to File
Next
9.BMP
N/A or 1.BMP to 16.BMP
* This menu is available
only if the optional
scan converter board
is installed.
30 sec.
Next Next
Capture Start
X=0001 Y=0001
Variable Variable
depends on depends on
the input. the input.
Next Next
Saving n.BMP
yy% Done
NOTE The front panel is
disabled until the %
done reaches 100%.
30 sec.
Next
Capture Size
X=1024 Y=0768
Variable Variable
depends on depends on
the input. the input.