Capturing A Logo - Extron electronics ISS 506 User Manual

Operation, cont'd

Capturing a logo

The ISS can capture an on-screen image to use as a logo.
N A logo is a bitmap image that can be superimposed on top of the preview and/or
Capture a displayed image as a logo as follows:
N For best results, freeze the input with the image that you want to capture.
1.
Press
5 times
Step
1
Figure 3-24 — Capturing a logo
2.
3.
4.
5.
N Rotate the Adjust
3-30 ISS 506 Integration Seamless Switcher • Operation
program output.
Press the Menu button until the LCD window displays the Logo Capture
Menu (figure 3-24).
Default
Cycle
MENU
30 sec.
Press
30 sec.
NEXT
Image Source
Logo
< >
Step
Capture Prog
2
Rotate the knobs to
select the source of
the image to capture.
Step
Press the Next button. The Image Source submenu appears.
{
Rotate the Adjust knob to select (< >) the output with the image that you
want to capture.
Press the Next button. The Capture Start submenu appears on the LCD
window. Yellow crop marks appear on the selected output video display.
Use the Adjust knobs to shift the starting point (upper-left corner) of the
capture area.
[
knob to shift the starting point on the X axis (horizontally).
{
Rotate the Adjust knob to shift the starting point on the Y axis (vertically).
Press
30 sec.
NEXT
Capture Start
Step
X=0001 Y=0001
Prev
4
0000
through
upper H size upper V size
Rotate the knobs to
3
Step
move the upper-left
5
corner of the image
area to be captured.
Y-Axis
X-Axis
Press
NEXT
To
Step
Figure 3-25
6
0000
through