Output.connections; Video.output.connections; Optional.video.output.connections - Extron electronics ISS 506 User Manual

Installation, cont'd
Output connections
Video output connections
N The two Program Video outputs, consisting of one set of five BNC connectors
The Program connectors (
monitor or projector. The Preview connectors (
local monitor.
f
Figure 2-8 — BNC output connections for RGBHV, RGBS, RGsB, and
component video
g
h
Optional video output connections
One of three possible output expansion boards can be installed in this location. The
expansion board receives the program output. The available output boards are:
• A DVI output board
• A scan converter (low resolution) output board
• An HD-SDI output board
2-6 ISS 506 Integration Seamless Switcher • Installation
and a 15-pin HD connector, output identical video signals at the same
resolution, refresh rate, and sync format.
f
and
Program video output BNC connectors — Connect an RGB or component
video display to these female BNC connectors. Figure 2-8 shows how to
connect the various video formats.
RGBHV
R G
R-Y /Y
Video
H V
RGsB and
Component
Video
Program video output 15-pin HD connector — Connect an RGB
or component video display to this female 15-pin HD connector.
Preview video output 15-pin HD connector — Connect an RGB
or component video display to this female 15-pin HD connector.
g
) output the video image for the program
h ) output the video image for the
RGBS
B/ R G
R-Y /Y
B-Y
Video
H V
S
R
G B/
R-Y /Y
B-Y
H V S
B/
B-Y
S