Exit.menu; Front Panel Operations; Power-On.indications - Extron electronics ISS 506 User Manual

Operation, cont'd
Exit menu
From the Exit menu (figure 3-18), press the Next button to return to the default
display cycle, or press the Menu button to return to the Auto Image menu.
Figure 3-18 — Exit menu flowchart

Front Panel Operations

The following paragraphs detail the power-up process and then describe input
selection, switching between the preview and program outputs, preset selection,
capturing and configuring a logo, and using the title function.
Power-on indications
Power is automatically applied when the power cord is connected to an AC source.
When AC power is applied, the switcher performs a self-test that dimly blinks all
of the front panel buttons twice, and then lights only the buttons for the selected
inputs, the selected effect, and the Menu and Next buttons. The self-test also
displays the model name and the firmware version in the LCD window. After
approximately 2 seconds, the LCD window reverts to its default display cycle,
alternating between three displays: two showing the selected program and preview
inputs and their rates, and the third showing the selected output rate (figure 3-19).
An error-free power up self-test sequence leaves all of the buttons, with the
exception of the selected inputs' buttons and the selected transition effect's button,
off and the LCD window displaying the default display cycle.
3-26 ISS 506 Integration Seamless Switcher • Operation
30 sec.
Auto
Menu
Image
Menu
Input
Configuration
Menu
Output
Configuration
Menu
Effects
Configuration
Menu
Logo
Capture
Menu
User
Presets
Menu
Advanced
Configuration
Menu
View Comm
Settings
Menu
* This menu is available
Scan Converter
only if the optional
* *
Configuration
scan converter board
is installed.
Menu
Menu Next
Exit Menu
Press Next
Menu
Default
Cycle