Selecting An Input To Be The Program Output - Extron electronics ISS 506 User Manual

The selected preview and program inputs, the picture adjustments, and other
current settings are saved in nonvolatile memory. When power is applied, the
latest configuration is retrieved.
Initializing
Power
Please Wait...
on
Extron
ISS 506 Vn.nn
10 2
sec. sec.
Figure 3-19 — LCD power up and default display cycle

Selecting an input to be the program output

To select an input to scale and display as the program output, press and release the
desired program input button. The selected input button lights green.
N Input selections can be made with audio broken away under RS-232/RS-422
or Ethernet control only. See chapter 4, "SIS
chapter 5, "Switcher Software"; and chapter 6, "HTML Operation".
The input button lights green when video only is selected.
The input button lights red when audio only is selected.
N Video and audio outputs can be muted under RS-232/RS-422 or Ethernet
control only. See chapter 4, "SIS
"Switcher Software" and chapter 6, "HTML Operation".
The Input button blinks, alternating between red and amber when video is
muted.
The input button blinks, alternating between green and amber when audio is
muted.
The input button blinks amber when both video and audio are muted.
Prog #1
2
Integration
sec.
SeamlessSwitcher
Programming and Control"; chapter 5,
™
ISS 506 Integration Seamless Switcher • Operation
Default Display Cycle
RGB Prev #3
48.4kHz 60Hz 15.7kHz
2
Output Rate
sec.
1024x768 @60Hz
Programming and Control";
™
S-Vid
59.9Hz
2
sec.
3-27