RED ONE Operation Manual page 77

Available functions that may be allocated to the User Keys are:
Function Description
Record Initiates camera record start / stop
Initiates camera monitor path mag-
Magnify
nify function
Toggles VIEW RAW selection
View RAW
On/Off
Initiates camera Auto White Bal-
Auto WB
ance
Toggles the EVF Color selection
Color
On/Off
Toggles the EVF Meter Assist se-
Meter
lection On/Off
Ramp Initiates Variable Speed Ramp
Time-lapse Initiates Time-lapse Record Mode
Zebra 1 Toggles Zebra 1 On / Off
GPIO
GPIO selects the GPIO preferences sub-menu.
INPUT A and INPUT B permit the function of GPI A and B to be defined as:
RECORD (Default): starts standard mode (video and audio) record. Subsequent trigger stops record.
PRE-RECORD: activates Pre-record. Subsequent triggers start / stop record.
TIMELAPSE: activates Time-lapse. Subsequent trigger activates one-shot or burst recording.
RAMP: initiates variable frame rate ramp speed change.
SHUT DOWN: initiates a controlled camera power down
PLAY CLIP: causes the selected Clip to play back at normal speed
NEXT CLIP: cues the selected clip to end. If at end, cues to beginning of next clip.
OUTPUT A and OUTPUT B permit the function of GPO A and B to be defined as either -
RECORDING: Transitions the output of the GPO at the Start and End of a recording.
Note: if in Time-lapse mode, GPO will maintain status until Time-lapse mode has been exited.
PLAYING: Transitions the output of the GPO when a Clip is playing in Playback mode.
Build 20 v20.1.6
OCTOBER 19, 2009
Function Description
Zebra 2 Toggles Zebra 2 On / Off
Increases volume of Channel 1 (when in
+ Volume 1
microphone mode)
Decreases volume of Channel 1 (when in
- Volume 1
microphone mode)
Increases volume of Channel 1 (when in
+ Volume 2
microphone mode)
Decreases volume of Channel 1 (when in
- Volume 2
microphone mode)
+ ISO Increases camera Sensitivity
- ISO Decreases camera Sensitivity
+ Shutter Increases camera Shutter Speed
- Shutter Decreases camera Shutter Speed
©2009 RED.COM INC.
75