Import User Profile; Data Not Saved During Export - RED ONE Operation Manual

NOTE: If SD Card is not inserted under left front of camera, camera will display:
When saving USER PROFILE, the following camera configuration information is recorded:
VIEWFINDER menu:
KEYMAP menu:
GPIO menu:
PLAYBACK menu:
DISPLAY menu:
FRAME GUIDE menu:

IMPORT USER PROFILE

To import USER PROFILE, perform the following:
1. Press the SYSTEM menu button on the rear of the camera.
2. Select SETUP menu.
3. Select PREFERENCES menu.
4. Select USER PROFILE menu.
5. Select IMPORT and scroll to the desired file.
6. Press Joystick to confirm USER PROFILE file selection.

DATA NOT SAVED DURING EXPORT

The data that is NOT saved when saving LOOK or USER PROFILE is:
•
Audio enable and mode
•
Project Time Base
•
Resolution
•
Quality
•
Timecode Settings
Build 20 v20.1.6
OCTOBER 19, 2009
Color: Enable and overly type setting
Meters: Enable and meter type setting
Zebras: Enable and Zebra 1, 2 Hi / Lo settings
Enable and User Key settings
Enable and GPIO settings
Settings
Enables and Shutter display settings
Enable and settings, including user defined Action and Title areas
©2009 RED.COM INC.
•
White Balance
•
ISO
•
Shutter Speed
•
Varispeed
•
Audio Levels
105