Media Errors - RED ONE Operation Manual

MEDIA ERRORS

INCOMPATIBLE PROJECT
The following error may be displayed inserting a CF card or connecting a RED-DRIVE® or RED-RAM®
(the camera LCD will display DISK INCOMPATIBLE):
When this error is present, the camera will not record and will display the following message at the top of
the screen (the camera LCD will display INCOMPATIBLE_DIGMAG):
This may be caused by one of the following:
•
The camera settings were changed while the media was removed and/or disconnected.
•
The media was formatted on a different camera with different settings.
To resolve this error, connect the CF card or RED-DRIVE® /RED-RAM® to a computer and save the files
from the media to the computer. Then you can either erase the CF card or RED-DRIVE® /RED-RAM® us-
ing the computer or format the CF card or RED-DRIVE® /RED-RAM® using the camera for which you
want to use the media.
MAGAZINE FORMATTING FAILED
If when selecting FORMAT, camera LCD displays "FORMAT FAILED" and the external monitors display
the message below.
Select OK and try again. If error continues, unmount media, install again and repeat format procedure.
OUT OF SPACE
Displays when 2 percent or less media is available for recording. Media is full and files should be down-
loaded and formatted or different formatted media should be connected.
Build 20 v20.1.6
OCTOBER 19, 2009 ©2009 RED.COM INC.
101