First Time Use - Setting Up Your Red One - RED ONE Operation Manual

5. Leave the battery to charge for the appropriate time as shown in the table (assuming battery is com-
pletely discharged).
6. Unplug the battery when the LED becomes steady Green and/or all the LEDs illuminate on the battery
LED array.

FIRST TIME USE - SETTING UP YOUR RED ONE™

Before recording, the camera must be set up properly.
1. Physically set-up camera as desired.
2. Download the latest camera firmware from
APPENDIX A: UPGRADING CAMERA
3. Perform a Black Shading Calibration. Refer to
under SYSTEM MENU CONTROLS.
4. Verify Back-Focus and adjust if necessary. Refer to
5. Connect digital media to camera. Refer to
6. Set up your project (Resolution, Time Base, Quality, etc.) Refer to
7. Format media. Refer to
8. Develop an exposure methodology using the camera tools (False Color, Histogram, etc.) and testing
to find the "fat RAW negative" for various light conditions. For detailed information refer to this link:
http://reduser.net/forum/showthread.php?t=30055
9. Frame, focus and record.
Build 20 v20.1.6
OCTOBER 19, 2009
Charging RED-BRICK® 140Wh using RED™ CHARGER
Charge Amount% (Minutes)
80 (120)
100 (210)
www.RED.com/support
FIRMWARE.
CONNECTING
APPENDIX B: MANAGING DIGITAL
©2009 RED.COM INC.
and upgrade camera. Refer to
BLACK SHADING under MAINTENANCE in SETUP
BACK FOCUS ADJUSTMENT.
MEDIA.
PROJECT
MEDIA.
SETUP.
25