Speed; Interval; Burst Type - RED ONE Operation Manual

INTERVAL: The camera waits for the period of time defined by the Interval parameter. See INTERVAL.
ONE-SHOT: The camera waits for a side record command or external GPI contact closure.

SPEED

Specifies the shutter speed to be used during Time-lapse. This control is the same as is available in the
Shutter menu, but it provides access to additional shutter speeds that may be used in Time-lapse record-
ing. To adjust: Select SPEED and twist joystick to change the highlighted SHUTTER SPEED box to the
desired setting.
The additional exposure time presets are 1/2, 1/3 1/4, 1/6, 1/8, 1/12, 1/16 second.
Step Print
Specifies the number of times each single frame captured in Time-lapse mode is to be recorded to the
digital media. Range is 1 to 10 frames. To adjust: Select STEP PRINT and twist joystick to change the
highlighted NUM FRAMES box to the desired setting (default is 1 frame.)

INTERVAL

Specifies the number of seconds the camera will wait before the next image is captured. Range is 1 to
1024 seconds. To adjust: Select INTERVAL and twist joystick to change the highlighted PERIOD box to
the desired setting (default is 5 seconds.)

BURST TYPE

Burst type specifies the type of burst recording. To adjust: Select BURST TYPE and twist joystick to
change the highlighted FRAMES ARE box to REPEATED or UNIQUE (default is UNIQUE.)
REPEATED: Specifies that each frame captured during the burst record be repeated. That is for each
Time-lapse event, a single frame is repeated N times, where N is the Step print value.
UNIQUE: Specifies that each frame captured during the burst record is unique. That is for each Time-
lapse event, N frames are captured and recorded, where N is the Step print value.
Build 20 v20.1.6
39
OCTOBER 19, 2009 ©2009 RED.COM INC.