Copying Media - RED ONE Operation Manual

3. Camera LCD will display MEDIA X and the lower left corner of the external monitor will display "SAFE
TO REMOVE" in Red text. The White text with the counter and media name at the bottom edge of the
display will disappear. You may now remove the CF or disconnect the RED-DRIVE® or RED-RAM®
safely.
NOTE: The camera will display this message until media is removed or disconnected. Once media
is removed or disconnected, the camera LCD will display NO DIGMAG and the lower left corner of
the external monitor will display NONE ATTACHED in Red text until media is inserted.
Procedure B
1. Push the SYSTEM button.
2. Select MEDIA, push joystick down or in to enter.
3. Select UNMOUNT, push joystick down or in to enter.
4. Camera LCD will display MEDIA X and the lower left corner of all external monitors will display "SAFE
TO REMOVE" in Red text. The White text with the counter and media name at the bottom edge of the
display will disappear. You may now remove the CF or disconnect the RED-DRIVE® or RED-RAM®
safely.
5. Push EXIT button to exit menu.

COPYING MEDIA

For use when media is connected directly to your computer. When copying media, it is recommended
that you drag the complete .RDM folder on the digital magazine to the archive storage media. This copies
all the media and metadata files. You won't need to copy the log and magazine profile files, but if you do
so, it will do no harm.
CAUTION: REDFLASH 16GB Compact Flash cards transfer data at extremely high rates. RED re-
commends a high-performance, professional UDMA reader (from a reputable manufacturer) when
downloading from 16GB CF Cards. Using inexpensive or low-quality readers may cause damage to
the cards and/or corruption/loss of media files stored on them.
Build 20 v20.1.6
OCTOBER 19, 2009 ©2009 RED.COM INC.
99