Basic Operation; Power Up / Down - RED ONE Operation Manual

BASIC OPERATION

This section describes powering up/down and basic controls of the RED ONE™ camera and how to in-
itiate a project.

POWER UP / DOWN

Power is supplied to the camera via a RED-BRICK® battery (connected through a RED™ BATTERY
PLATE, RED™ QUICKPLATE or RED™ CRADLE) or RED™ CHARGER connected to the POWER con-
nector located at the rear of the camera.
To power the camera up (turn on); push the
-
To power the camera down (turn off); push the
-
During power up, PIN, Build and Version will display on the camera LCD display and all external monitors.
When powering the camera through direct DC power such as RED™ CHARGER, status is displayed on
the camera's LCD Display and any external monitoring outputs as "Power DC".
When powering camera through RED-BRICK® batteries, battery status is displayed on the camera's LCD
Display as well as any external monitoring outputs as "Battery (with battery power percent remaining)".
Build 20 v20.1.6
OCTOBER 19, 2009
power on/off switch
power on/off switch
©2009 RED.COM INC.
once.
once.
23