Fujitsu PRIMERGY RX600 S3 User Manual page 217

2
Remove the top cover without turning off the server.
"7.2 Removing and Attaching the Top Cover" (pg.184)
3
Touch a metal part of the server to discharge static electricity.
4
Check the status of the hot-plug LED switch on the PCI slot for the expansion
card to be replaced. Confirm that its switch is off.
Hot-plug LED switch
5
Remove the failed expansion card and install a new one.
For detailed procedures, refer to step 4 through 6 in "7.5.3 How to Install Expansion Cards"
( pg.214).
6
Press the hot-plug LED switch.
Confirm the LED status is turned blinking to lighting.
7
Install the top cover.
8
After replacing the expansion card, confirm that the expansion card is
recognized on the OS.
Click [Start] → [Management Tools] → [Computer Management] in this order, and click [Device
Manager]. Confirm the card in the Device Manager list.
• When sliding the server out of the rack, make sure that the cables on
the backside, such as the power cable, are not unplugged or become
entangled.
• Do not touch other devices inside the server.
PRIMERGY RX600 S3 User's Guide
1
2
3
4
5
6
7
8
9
217