Power Button; Power Led; Memory Slots - Fujitsu PRIMERGY RX600 S3 User Manual

Chapter 1 Overview
d Power button (
Press this button to perform a hot-insertion or hot-removal of a Memory Board.
After replacing the memory, press this button to turn on.
e Power LED (
Green light turns on when the Memory Board is powered on.
The light turns off when the power is not detected on all boards.
f DIMM Status LED
The position of the LEDs corresponds to that of the memory slot. This LED is turned off when
the DIMM is functioning properly or the memory is not installed. Being lit amber indicates error
for the corresponding DIMM.
g Memory Slots
Install the memory modules. The slots are arranged in the order of Memory Slot 1B, Memory
Slot 1A, Memory Slot 2B, and Memory Slot 2A from the top.
30
)
)
Memory slot 1B
Memory slot 1A
Memory slot 2B
Memory slot 2A