Console Redirection Submenu; Bmc Information Submenu - Fujitsu PRIMERGY RX600 S3 User Manual

8.3.10 Console Redirection Submenu

Settings for console redirection are configured on the [Console Redirection] submenu.
Item
COM1 Console Redirection
Console Redirection
Flow Control
Bit Rate
Terminal Type
Console Redirection Mode

8.3.11 BMC Information Submenu

The information on BMC (Baseboard Management Controller) is displayed.
Item
Board Part Number
Board Serial Number
System Part Number
System Serial Number
Chassis Part Number
Chassis Serial Number
BMC Firmware Revision
SDR Revision
table: Items on the Console Redirection Submenu
Settings
• Enabled
• Disabled (initial value)
• None (initial value)
• RTS/CTS
• XON/XOFF
• RTS/CTS + CD
• 9.6k
• 19.2k (initial value)
• 38.4k
• 57.6k
• 115.2k
• PC-ANSI
• VT100
• VT100+ (initial value)
• VT-UTFB
• Standard (initial value)
• Enhanced
table: Items on the BMC Information Menu
The revision of board is displayed.
The serial number of board is displayed.
The parts number of the server is displayed.
The serial number of the server is displayed.
Nonuse
Nonuse
The firmware revision of BMC is displayed.
The revision of SDR is displayed.
PRIMERGY RX600 S3 User's Guide
Description
Set whether or not to enable the console
redirection.
Set the flow control of console redirection.
Set the bit rate.
Set the terminal type when using console
redirection.
Set the execution mode for the console
redirection.
Description
8
255