Fujitsu PRIMERGY RX600 S3 User Manual page 264

Chapter 9 Operation and Maintenance
Typing the keyboard does not display any characters, or the mouse cursor
does not move.
Check to see whether the keyboard and mouse are connected properly. If they are not connected, turn the
server off and then connect the cables to the server. For the connection location, refer to "Start Guide".
The screen shakes.
If a device that produces a strong magnetic field such as a television or speaker is near the display, place
them further away from the display.
The display may also shake if a nearby cell-phone receives a call. Do not use a cell-phone near the
display.
The screen display is distorted.
The screen display may be distorted during 3D program execution or the 3D program may terminate
abnormally. If this occurs, set Color quality in screen properties to anything other than True Color (32
bits).
CD-ROM Drive Unit / DVD-RAM Drive Unit
Cannot read data.
• Check to see whether the CD-ROM is inserted properly. If it is not inserted, correctly insert the CD-
ROM so that the label is facing up.
• The CD-ROM may be dirty. If it is dirty, wipe it with a soft, dry cloth.
• The CD-ROM may be scratched or bent. If scratched or damaged, replace the CD-ROM.
The unit does not operate properly.
Check to see whether the internal cable is connected properly. If it is not connected, correctly connect
the internal cable.
SCSI Device (Internal/External)
The unit does not operate properly.
• Check to see whether the internal cable is connected properly. If it is not connected, correctly connect
the internal cable. For the connection location, refer to "7.7.2 Installable 5-inch Internal Devices and
Notes" ( Pg.224).
• For SCSI devices, check to see whether the SCSI ID and terminator are set correctly. If they are not
set, correctly set the SCSI ID and terminator.
264