Installation In Preparation Mode - Fujitsu PRIMERGY RX600 S3 User Manual

Settings values in wizards
Setting items in wizards are set to the values set on the first server. For installation on subse-
quent servers, you must change the following items in the "OS installation wizard". For other
items, change the settings as necessary. You do not need to start up wizards where no settings
will be changed.
User
Information
Network
Protocol
If the settings for the first server are not reflected to wizards, perform the procedure over again
from copying the floppy disk.

3.5.3 Installation in Preparation Mode

Edit the configuration file and perform installation in preparation mode.
If ServerStart is not installed in the client computer where the preparation mode is executed, refer to "2.4
Preparation for Using ServerStart on a Client Computer" ( pg.55) to install ServerStart. If a different
version of ServerStart has been installed, uninstall it and install the proper version. For details on how to
uninstall ServerStart, refer to "2.4.2 Uninstalling ServerStart" ( pg.57).
ServerStart starts up when it is installed. However, be sure to follow these installation procedures.
Performing the procedure in "3.2.1 Starting Up the Preparation Mode" ( pg.77) deletes the contents of
the ServerStart floppy disk, making the disk unavailable for installation on multiple servers.
1
Start up ServerStart.
If ServerStart has already been started, you do not have to restart it. If it is not started, perform the
following startup procedures.
1. Insert the ServerStart Disc 1 CD-ROM into the client computer.
2. Click [Start] → [Programs] → [Fujitsu Siemens ServerStart] → [ServerStart(Start
from CD)].
ServerStart starts up and the [Welcome to ServerStart] window appears.
2
Select the OS to be installed.
The preparation mode starts up.
3
Insert the ServerStart floppy disk copied in the preparatory procedure into the
floppy disk drive and click [Start here to configuration file].
The [Open ServerStart Configuration File] window appears.
table: Settings to be Changed for Installation on Subsequent Servers
Window
Setting item name
name
Computer name
Product ID/CD key
IP address
PRIMERGY RX600 S3 User's Guide
Remarks
The setting must be changed when the second
and subsequent servers are on the same
network as the first server.
The setting must be changed.
The setting must be changed when the second
and subsequent servers are on the same
network as the first server.
3
111