Latest Drivers - Fujitsu PRIMERGY RX600 S3 User Manual

12
Remove the driver disk and restart the system.
When a LAN card is added, the following window may appear at system startup after addition
of a LAN card. Perform the appropriate procedure according to the displayed window.
•When the "New Hardware Detection Wizard" window appears
Insert the driver disk created from the ServerStart CD-ROM and perform Step 6 and
subsequent steps in "Updating LAN Drivers".
•When the [Insert Disk] window prompts you to insert the "Intel PRO Adapter CD-ROM or
Insert the driver disk created from the ServerStart CD-ROM and install the driver.
The "Digital signature was not found" message may appear. If it appears, click [Yes] to con-
tinue the operations.
When the [Overwriting the Files] window appears, normally do not overwrite the files (select
[Do not overwrite all files]).
After LAN driver installation, names of the LAN devices are displayed as follows.
Onboard LAN (1000BASE-T)
PG-2861
PG-1862
PG-1882
PG-1892

4.3.4 Latest Drivers

For the latest drivers, refer to the Fujitsu PRIMERGY website (http://primergy.fujitsu.com).
®
floppy disk" or "Intel PRO/1000 Disk Driver".
table: LAN device name
LAN cards
Broadcom NetXtreme Gigabit Ethernet
Intel(R) PRO/1000 PT Dual Port Server Adapter
Intel(R) PRO/1000 MT Dual Port Server Adapter
Intel(R) PRO/1000 MF Server Adapter
Intel(R) PRO/1000 MT Server Adapter
PRIMERGY RX600 S3 User's Guide
LAN device name
4
135