Fujitsu PRIMERGY RX600 S3 User Manual page 133

6
Click [Close] to close the properties window.
Installing the LAN Driver
Perform the following procedures on each [Ethernet controller] under [Other devices] in [Device
Manager].
1
Insert the driver disk created from the ServerStart CD-ROM into the server.
2
Double-click [Ethernet controller] under [Other devices].
The properties window for the Ethernet controller appears.
3
Click [Reinstall Driver] in the [General] tab window.
The [Device Driver Upgrade Wizard] window appears.
4
Select [Install the software automatically (Recommended)] and click [Next].
The driver will be installed.
5
Click [Finish].
6
Click [Close] to close the properties window.
7
Remove the driver disk and restart the system.
After LAN driver installation, names of the LAN devices are displayed as follows.
LAN cards
Onboard LAN (1000BASE-T)
PG-2861
PG-1862
PG-1882
PG-1892
table: LAN device name
LAN device name
Broadcom NetXtreme Gigabit Ethernet
Intel(R) PRO/1000 PT Dual Port Server Adapter
Intel(R) PRO/1000 MT Dual Port Server Adapter
Intel(R) PRO/1000 MF Server Adapter
Intel(R) PRO/1000 MT Server Adapter
PRIMERGY RX600 S3 User's Guide
4
133