How To Create Driver Disks [Floppybuilder Function] - Fujitsu PRIMERGY RX600 S3 User Manual

Chapter 4 Manual OS Installation

4.1.2 How to Create Driver Disks [FloppyBuilder function]

Driver disks are created from the ServerStart CD-ROM using the ServerStart FloppyBuilder function.
The FloppyBuilder function is available in the following environments.
• Starting up the ServerStart system on a client computer (Recommended)
• Starting up the system from the ServerStart CD-ROM on the server
When creating driver disks on a client computer, it is necessary to install ServerStart on the client
computer beforehand. Install it according to "2.4 Preparation for Using ServerStart on a Client
Computer" ( pg.55).
If a different version of ServerStart has been installed, uninstall it and install the proper version. For
details on how to uninstall ServerStart, refer to "2.4.2 Uninstalling ServerStart" ( pg.57).
Starting ServerStart
If ServerStart has already been started, you do not have to restart it. If it is not started, perform the
following startup procedures.
For Creation on a Client Computer
1
Insert the ServerStart Disc 1 CD-ROM into the client computer.
2
Click [Start] → [Programs] → [Fujitsu Siemens ServerStart] →
[ServerStart(Start from CD)].
ServerStart starts up and the [Welcome to ServerStart] window appears.
For Creation on the Server
Confirm that the floppy disk drive for USB connection has been connected before turning on the
server.
1
Turn on the server and insert the ServerStart Disc 1 CD-ROM immediately.
ServerStart starts up and a message appears prompting you to insert the ServerStart floppy disk.
116