Chapter 8 Configuring Hardware and Utilities
8.3.12 LAN Management Submenu
Settings for onboard LAN are configured on the [LAN Management] submenu.
Item
Static IP Enable
Host IP Address
Router IP Address
NIC 1 MAC Address
8.3.13 SEL Logging Submenu
Settings for system event log are configured on the [SEL Logging] submenu.
Item
Clear Log
Event Log Full Mode
256
table: Items on the LAN Management Submenu
Settings
• Enabled
• Disabled(initial value)
When setting "Static IP Enable" to "Enabled", set the host IP address.
When setting "Static IP Enable" to "Enabled", set the router IP address.
The MAC address of the onboard LAN is displayed.
table: Items on the SEL Logging Submenu
Settings
• Enabled
• Disabled(initial value)
• Maintain
• Overwrite(initial value)
Description
Set whether or not to enable the static IP address
assignment. When "Enabled" is set, the follow-
ing items should be set.
Description
Set whether or not to clear the event log.
Set whether or not to overwrite the event log if the
area for the log is full.
Note:
When this setting is changed, existing event
log is cleared. Before changing, refer to "9.3
System Event Log" ( pg.277) and save the
log.