Installing The Lan Driver (Windows Server 2003) - Fujitsu PRIMERGY RX600 S3 User Manual

Chapter 4 Manual OS Installation
8
Remove the driver disk and restart the system.
After LAN driver installation, names of the LAN devices are displayed as follows.
Onboard LAN (1000BASE-T)
PG-2861
PG-1862
PG-1882
PG-1892

4.3.2 Installing the LAN Driver (Windows Server 2003)

The LAN card PG-1862 is recognized as the network adapters when the OS is installed.
Perform " Updating LAN Drivers" ( pg.132) on all LAN device names under [Network adapters],
and then perform "
devices].
The network adapter is recognized when the LAN card PG-1862 is mounted during OS installation.
Updating LAN Drivers
Perform the following procedures on all LAN device names under [Network adapters] in [Device
Manager].
1
Double-click a LAN device name under [Network adapters].
2
Insert the driver disk created from the ServerStart CD-ROM into the server.
3
Click [Update Driver] in the [Driver] tab window.
The [Welcome to the Hardware Update Wizard] window appears.
4
Select [Install the software automatically (Recommended)] and click [Next].
The driver will be installed.
5
Click [Finish].
132
table: LAN device name
LAN cards
Broadcom NetXtreme Gigabit Ethernet
Intel(R) PRO1000 PT Dual Port Server Adapter
Intel(R) PRO/1000 MT Dual Port Server Adapter
Intel(R) PRO/1000 MF Server Adapter
Intel(R) PRO/1000 MT Server Adapter
Installing the LAN Driver" ( pg.133) on the ethernet controllers under [Other
Names of the LAN devices are displayed as follows.
LAN cards
PG-1862
LAN device name
table: LAN device name
LAN device name
Intel(R) PRO/1000 MT Dual Port Network Connection