Fujitsu PRIMERGY RX600 S3 User Manual page 126

Chapter 4 Manual OS Installation
2. When the "Please insert the disk labeled Manufacturer-supplied hardware support
disk into Drive A:" message appears, insert the driver disk created from the
ServerStart CD-ROM and press the [Enter] key.
The following message appears.
You have chosen to configure a SCSI Adapter for use
with Windows 2000, using a device support disk
provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following
list, or press ESC to return to the previous screen.
3. Select following item and press the [Enter] key.
LSI MEGARAID Products for Windows 2000
4. Follow instructions in the window to perform installation.
When a message prompting you to insert a floppy disk appears, insert the proper
driver disk and press the [Enter] key.
6
Follow the instructions from the setup program to continue the installation
procedures.
Cautions on Restarting
7
Install the ChipSet driver.
1. Insert the ServerStart Disc 1 CD-ROM into the drive of the server.
When the ServerStart window appears, exit ServerStart.
2. Execute the following command on the ServerStart CD-ROM.
[CD-ROM drive] :\DRVERS\ChipSet\Intel\E8501\infinst_autol.exe
The installation wizard starts up.
3. Click [Next]. Follow instructions in the window to perform installation.
4. When the "Intel(R) Chipset Software Installation Utility is complete." message
appears, eject the ServerStart CD-ROM from the CD-ROM drive and click [Finish]
to restart the system.
8
Install the LAN driver.
Install the LAN driver using the driver disk created from the ServerStart CD-ROM. For more
details, refer to "4.3 Installing the LAN Driver" ( pg.129).
9
Install the SAF-TE driver.
1. Insert the ServerStart Disc 1 CD-ROM into the drive of the server.
When the ServerStart window appears, exit ServerStart.
2. Right-click the [My Computer] icon on the desktop and click [Manage] from the
displayed menu.
3. Click [Device Manager] from the displayed list.
126
Repeat these procedures to install a driver for another card.
In the course of installation, a message appears to indicate that the setup program restarts.
Wait until it restarts automatically.