Notes On Advanced Uninterruptible Power Supply (Ups) - Fujitsu PRIMERGY RX600 S3 User Manual

Chapter 5 Operations after OS Installation
For Windows 2000 Server
1
Right-click [My Computer] icon on the desktop and select [Manage].
2
Click [Disk Management].
3
Right-click the partition to change the letter and select [Change Drive Letter
and Path].
The [Change Drive Letter and Path] window appears.
4
Click [Edit].
The [Change Drive Letter or Path] window appears.
5
Change the drive letter.
5.5.4 Notes on Advanced Uninterruptible Power Supply
(UPS)
Note the following points when using an advanced uninterruptible power supply (referred to as UPS
afterward).
UPS Shutdown Time Setting
Specify enough time for the UPS power-off time (time from the shutdown direction to the actual power-
off). If this time is set insufficiently, the power will be cut off before system shutdown, which may result
in destruction of data. For more details, refer to the manuals for UPS and UPS management software.
Power Supply Control by UPS
Settings are required to turn on the server automatically at power recovery or during scheduled operation
using the UPS management software (PowerChute Network Shutdown, PowerChute Business Edition).
Use ServerView or Server Management Tools to configure the setting.
Configuration Using ServerView
For details about ServerView, refer to the "ServerView User's Guide".
This setting can be found in "3.2.4 Serious Error Handling (ASR)".
1
Click [Start] → [Programs] → [Fujitsu ServerView] → [ServerView] to start
ServerView.
2
Click [ServerView] → [Action].
The [ASR properties] window appears.
158