Configure System Ras And Performance Submenu - Fujitsu PRIMERGY RX600 S3 User Manual

8.3.5 Configure System RAS and Performance Submenu

Settings for memory configuration are configured on the [Configure System RAS and Performance]
submenu.
table: Items on the Configure System RAS and Performance Submenu
Item
Hardware Memory Test
Patrol Scrub
Retest All System Memory
Sparing Threshold
RAID Upgrade Gap
Desired Memory
Configuration
View Configuration Details
Set Memory Hotplug in SRAT
table
View Configuration Details Screen
Item
Configuration
Max Effective Size
Min Effective Size
Capabilities
Configuration Possible
Sparing
Hot Replace
Hot Add
Board Interleave
Settings
• Enabled (initial value)
• Disabled
Enabled (unchangeable)
• Enabled
• Disabled (initial value)
15 (unchangeable)
Disabled (unchangeable)
• Max Performance (initial
value)
• Max Compatibility
• Mirror
• RAID
The detailed information on memory configuration is displayed. Press the
[Enter] key to display " View Configuration Details Screen" ( pg.249).
Yes (unchangeable)
table: Items on the View Configuration Details
The current memory configuration is displayed.
The maximum effective size of memory is displayed in MB.
The size in case of that the maximum size of memory is set to the spare is displayed
in MB.
Availability of selected memory configuration is displayed.
Availability of spare memory with the current memory configuration is displayed.
Availability of Hot Replace with the current memory configuration is displayed.
Availability of Hot Add with the current memory configuration is displayed. "Hot
Add" is not supported.
The information on memory board interleave is displayed.
PRIMERGY RX600 S3 User's Guide
Description
Set whether or not to enable the POST memory
test.
Set to enable the memory scrubbing function.
Set whether or not to retest all system memory
after the event such as replacing the memory.
"Enabled" returns to "Disabled" automatically
after testing.
This value cannot be changed.
Set the size of memory which can be added
when hot-replacing the memory boards in the
memory RAID configuration.
Set the memory configuration.
"Max Compatibility" is not supported.
Set to enable the control area for the memory
Hot Add. "Hot Add" is not supported.
Description
8
249