Removing And Installing The Standard Rack Mounting Kit Shipping Brackets - Sun Microsystems Fire X4800 Installation Manual

Removing and Installing the Standard Rack Mounting Kit
Shipping Brackets
If the server is shipped in a rack, it must be supported by shipping brackets.
If the server is shipped to you in a rack, you must remove the shipping brackets before
■
placing it in service. See
Brackets " on page
If you plan to ship the server in a rack, see
■
Shipping Brackets" on page
The shipping bracket parts are in the accessory tray with the rack mounting hardware. See
"Location of the Rack Mounting Kit and the Shipping Bracket Kit" on page 25
▼
How to Remove the Standard Rack Mounting Kit Shipping Brackets
This procedure describes how to remove brackets from a system equipped with the standard
rack mounting kit.
The shipping bracket kit consists of a front bracket, a rear bottom bracket, a rear top bracket,
screws to connect them to the rack, and cage nuts to be used with the rear brackets on racks with
square holes. These appear in
Brackets" on page

Removing and Installing the Standard Rack Mounting Kit Shipping Brackets

"How to Remove the Standard Rack Mounting Kit Shipping
39.
41.
"How to Install the Standard Rack Mounting Kit Shipping
41.
"How to Install the Standard Rack Mounting Kit
for details.
39