1.2
Mounting the Brackets
1. Mount the four system brackets vertically onto the Sun Fire 4810 system using five
screws each. Mount the brackets so that they extend beyond the front and rear of
the system.
the system brackets are identical so they can be mounted on either side of the Sun
Fire 4810 system (FIGURE 1-1).
FIGURE 1-1
2. Mount the two rails horizontally into the Sun Fire cabinet using four screws per
rail. Screw each hanger hole into cabinet hole #22 and the bottom slots into
cabinet hole #20.
The rails are identical so they can be mounted on either side of the system. They are
shown in FIGURE 1-3.
1-2
Sun Fire 4810/4800/3800 Systems Cabinet Mounting Guide • January 2002
Mounting System Brackets to the Sun Fire 4810 System