< Previous Next >
2011 - RX-8 - Engine
FUEL PUMP UNIT INSPECTION [13B-MSP]
Continuity Inspection
1. Disconnect the negative battery cable.
2. Disconnect the fuel pump unit connector.
3. Inspect for continuity between fuel pump unit connector terminals B and D.
If there is no continuity, replace the fuel pump unit. (See
REMOVAL/INSTALLATION
If as specified, carry out the "Circuit Open/Short Inspection".
Circuit Open/Short Inspection
1. Inspect the following wiring harnesses for open or short (continuity check).
[13B-MSP].)
FUEL PUMP UNIT