Extracting The Power Supply Unit; Figure 2 Psu Location; Figure 3 Harness Location For Psu - Mellanox Technologies MIS5022Q-1BFR Dismantling Manual

Dismantling Guide
1.4

Extracting the Power Supply Unit

The power Supply unit is located on the side of the switch unit next to the main
board.
Figure 2 PSU Location
1. Disconnect the 3 harness connectors from the main board, the inlet and the ground.
Figure 3 Harness Location for PSU
2. Disassemble the 4 screws & washers attaching the power supply to the mechanical
base.
Mellanox Technologies Confidential
8 of 13
Rev. 1.0