Restoring Factory Settings - Garmin GPS 400W Pilot's Manual & Reference

2 - NAV PAGES
Restoring Factory Settings
Press the small right knob momentarly to
7.
remove the cursor from the page.
8. If "WPT" s selected as the waypont type, you
can desgnate any arport, NAVAID or user
waypont as a reference waypont. Press the
small right knob, turn the large right knob
to hghlght the waypont dentfier field, then
use the small and large right knobs to enter
the dentfier of the desred waypont. Press
ENT to confirm the selected waypont. Press
the small right knob to remove the cursor.
54

Restoring Factory Settings

A "Restore Defaults?" option allows you to reset
all data fields to their original factory default settings.
This will return the three user-selectable fields at the
top of the page AND the reference waypoint fields to
default settings.
To restore the factory default settings:
Press MENU to dsplay the poston page
1.
optons menu.
Turn the large right knob to hghlght
2.
"Restore Defaults?" and press ENT.
190-00356-00 Rev B