Flying A Dme Arc Approach - Garmin GPS 400W Pilot's Manual & Reference

5 - PROCEDURES
DME Arc Approach
16. As you cross the MAP, "SUSP" wll appear
above the OBS key, ndcatng that automatc
sequencng of approach wayponts wll be sus-
pended at the MAP. A "from" ndcaton wll
be dsplayed on the CDI and default NAV page,
but course gudance along the final approach
course wll contnue. If a mssed approach s
requred, use the OBS key to ntate the mssed
approach sequence.
92

Flying a DME Arc Approach

The GPS overlay for a DME arc approach uses
additional Jeppesen-provided waypoints to define the
arc. These waypoints are indicated by "D" as the first
letter in the waypoint name. This is followed by three
numbers which indicate the radial the waypoint lies
on. The last letter indicates the radius of the arc.
Billard Muni (Topeka, KS)
VOR or GPS Rwy 22

NOTE: As this manual was being written, the let-
ter/number DME arc names were being replaced
with standard five-letter intersection names. You
may encounter either naming convention for an
approach you select.
When you are cleared for a DME arc approach, you
may do one of the following to intercept the arc:
• Follow a specified radial inbound to intercept the
IAF.
• Fly directly to the IAF at the beginning of the
arc.
• Follow ATC vectors which allow you to intercept
the arc at any point along the arc.
This example is based upon a flight from Hutchin-
son (Kansas) Municipal (KHUT) to Billard Municipal
190-00356-00 Rev B
DO NOT USE
FOR NAVIGATION