Garmin GPS 400W Pilot's Manual & Reference page 131

NOTE: Not all approaches in the database are
approved for GPS use. As you select an approach,
G
a " " designation to the right of the procedure
P
S
name indicates the procedure can be flown us-
ing the GPS receiver. Some procedures will not
have this designation, meaning the GPS receiver
may be used for supplemental navigation guid-
ance only. ILS approaches, for example, must be
flown by tuning the VLOC receiver to the proper
frequency and coupling the VLOC receiver to the
external CDI (or HSI).
Airport Approach Page Options
The following options are available for the airport
approach page, by pressing the MENU key:
Load into Active FPL? allows you to load the
selected approach into the active flight plan—with-
out activating it. This performs the same operation
as selecting "Load?" from the procedures page "Select
Approach?" option.
To load an approach from the airport approach
page:
1. Select the desred approach and transton
usng the steps outlned n Secton 5.
Press MENU to dsplay the arport approach
2.
page optons.
3. Turn the large right knob to hghlght "Load
nto Actve FPL?" and press ENT.
4. The actve flght plan page wll appear. Press
FPL to return to the arport procedures page.
Load and Activate? allows you to load the
selected approach into the active flight plan and
activate navigation guidance to the approach
transition.
To load and activate an approach from the airport
approach page, follow the steps above, but select
"Load and Activate?" in step #3.
Select Approach Chnl? allows you to select the
channel number for a WAAS approach for the
current destination. The channel number for the
WAAS approach is available from an approved
approach chart.
If duplicate numbers are available for a channel,
a list will be available where you may select the
desired approach.
After selecting "Select Approach Chnl?",
choose the WAAS channel number for the
190-00356-00 Rev B
6 - WPT PAGES
Airport Approaches
current destination.
121