Setup 2 Page - Garmin GPS 400W Pilot's Manual & Reference

Setup 2 Page

To select, highlight
with cursor and
press ENT.
The Setup 2 page provides access to display adjust-
ments, parameters which define the nearest airport
search, and COM transceiver channel spacing. When
an item is selected, the corresponding page will appear
providing access to the various unit settings.
To select an item from the Setup 2 page:
1. Press the small right knob momentarly, to
actvate the flashng cursor.
2. Turn the large right knob to select the desred
setup tem, and press ENT.
Display— allows you to adjust the display for
optimum viewing in any condition. Automatic back-
lighting is available which uses a built-in photocell
Fourth Page
(at the top left corner of the display bezel) to make
in AUX group
the proper display adjustments without any user
intervention. Automatic contrast adjustment varies
the screen contrast level based upon current unit
temperature. You may also select manual control of
the display contrast and backlighting to tailor the
400W-series unit display to your needs.
Nearest Airport Criteria— defines the minimum
runway length and surface type used when deter-
mining the 25 nearest airports to display on the
nearest airport page. A minimum runway length
and/or surface type may be entered to prevent air-
ports with small runways, or runways that are not
of appropriate surface, from being displayed. The
default settings are "0 feet (or meters)" for runway
length and "any" for runway surface type.
SBAS Selection— selects the Space Based Aug-
mentation System (SBAS) used for navigation and
allows turning WAAS on and off.
190-00356-00 Rev B
9 - AUX PAGES
The following setup items are available:
NOTE: Display backlighting changes are not
saved when the 400W-series unit is turned off.
Backlighting will revert to the "Auto" setting the
next time the unit is turned on.
Setup 2
171