Garmin GPS 400W Pilot's Manual & Reference page 63

NOTE: Do not rely solely on MSA as an absolute
measure of safe altitude. Consult current charts
and NOTAMs for your area.
To change the user-selectable data fields:
1. Press MENU to dsplay the Poston page
optons menu.
Turn the large right knob to hghlght
2.
"Change Felds?" and press ENT.
Turn the large right knob to hghlght the
3.
data field you wsh to change.
Turn the small right knob to dsplay the lst
4.
of avalable data tems. Contnue turnng the
small right knob to select the desred data
tem from the lst.
5. Press ENT to select the desred data tem and
return to the poston page.
6. Press the small right knob momentarly to
remove the cursor from the page.
The position page also features a reference
waypoint field, located at the bottom of the page, to
indicate your bearing and distance to/from a selected
waypoint. The reference waypoint field can display
bearing and distance information for a nearby airport
(default), VOR, NDB, intersection or user waypoint.
To change the reference waypoint information:
Press MENU to dsplay the poston page
1.
optons menu.
2. Turn the large right knob to hghlght
"Change Felds?" and press ENT.
Turn the large right knob to hghlght the
3.
waypont type field (bottom left corner of the
page; default settng wll show "APT").
Turn the small right knob to dsplay the lst of
4.
avalable waypont types. Contnue turnng the
small right knob to select the desred data
tem from the lst.
5. Press ENT to select the desred type and return
to the poston page.
6. To select between "bearng FROM" or "bearng
TO" to the reference waypont, turn the small
right knob to select the desred bearng refer-
ence and press ENT.
190-00356-00 Rev B
2 - NAV PAGES
Position Page
53