Selecting Direct-To A Holding Pattern - Garmin GPS 400W Pilot's Manual & Reference

3 - DIRECT-TO

Selecting Direct-To a Holding Pattern

You may select a Direct-To course to a holding pat-
tern that is in your flight plan.
To set a direct-to course to a holding pattern:
1. Press the FPL key to reach the actve flght plan
page.
Press the small right knob to actvate the
2.
cursor. Turn the large right knob to hghlght
the hold leg of the flght plan.
3. Press direct-to. "Actvate" wll be hghlghted.
Press ENT to actvate a course Drect-To the
holdng pattern. Or, press CLR to cancel the
process.
4. The holdng pattern wll now be set as your
next waypont.
66 190-00356-00 Rev B