Navcom Page - Garmin GPS 400W Pilot's Manual & Reference

400w series
Hide thumbs Also See for GPS 400W:
Table of Contents

Advertisement

NavCom Page

From the default NAV page, simply turn the small
right knob to display the map page and again to dis-
play the NAVCOM page. The NAVCOM page displays
the available frequencies (communications and naviga-
tion) for the departure airport, any en route airports
that are included in your flight plan, and the final
destination airport. When using the direct-to function,
frequencies will be listed for the airport nearest to your
starting position and the destination airport.
A frequency listed on the NAVCOM page can be
quickly transferred to the standby field of the COM
or VLOC windows. This time-saving process prevents
having to "re-key" a frequency already displayed else-
where on the screen.
To display the frequency list for the active flight
plan or direct-to airport:
In the Nav functon, turn the small right knob
1.
to reach the NAVCOM page.
2.
Push the small right knob to actvate the
cursor on the arport dentfier field (n the
GPS wndow). Turn the small right knob to
dsplay the lst of arports (departure, arrval
and en route) for your flght plan or drect-to.
Contnue to turn the small right knob untl
the desred arport s selected.
Press ENT to dsplay the frequency lst for the
3.
selected arport.
Press ENT to show the frequencies for the
selected airport.
To select a communication or navigation fre-
quency:
1.
On the NAVCOM page, push the small right
knob to actvate the cursor n the GPS wn-
dow.
2.
Turn the large right knob to select the desred
frequency from the lst.
Selecting a frequency on the NAVCOM page.
3.
Press ENT to transfer the selected frequency to
the standby field n the COM or VLOC wndow.
COM frequences wll automatcally go to the
standby field of the COM wndow and navgaton
frequences wll automatcally go to the standby
field of the VLOC wndow, regardless of whch
wndow s currently hghlghted by the cursor.
4.
To actvate the selected frequency, press the
COM flip-flop (or VLOC flip-flop) key.
Swap the standby COM frequency into the
active Com frequency location.
190-00356-00 Rev B
TAKEOFF TOUR
NAVCOM Page
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gnc 420awGnc 420wGns 430awGns 430w

Table of Contents