Map DRect-To; ARspace InformatOn On The Map - Garmin GPS 400W Pilot's Manual & Reference

2 - NAV PAGES
Map Page
Map Direct-To
To designate an on-screen airport, navaid or user
waypoint as your direct-to destination:
1. Use the pannng functon (see prevous page)
to place the target ponter on a waypont.
Press direct-to key to dsplay the select drect-
2.
to waypont page, wth the selected waypont
already lsted.
Press ENT twce to confirm the selecton and
3.
begn navgatng to the waypont.
The direct-to function can be used anywhere on
the map. If nothing currently exists at the crosshair
position, a new waypoint (called "+MAP") will be cre-
ated at the target pointer location before the direct-to
is initiated.
Airspace Information on the Map
When a special-use or controlled airspace bound-
ary appears on the map display, you can quickly
retrieve information — such as floor/ceiling limits and
controlling agency — directly from the map.
To view airspace information for an on-screen
special-use or controlled airspace:
1. Use the pannng functon (see prevous page)
to place the target ponter on an open area
wthn the boundares of an arspace. If the
area s congested and t s dfficult to select an
open area, you may need to zoom n or press
CLR to make the selecton easer.
36
Press ENT to dsplay an optons menu.
2.
3. "Revew Arspace?" should already be hgh-
lghted, f not select t wth the small right
knob. Press ENT to dsplay the arspace nfor-
maton page for the selected arspace.
To display airspace frequencies:
1. Whle vewng the arspace nformaton dsplay
n the above example, turn the large right
knob to hghlght "Frequences?" and press
ENT. Press CLR to return to the arspace
nformaton page.
2. Press CLR to ext the arspace nformaton
page. Press the small right knob (CRSR) to
ext pannng.
190-00356-00 Rev B