Select ArrVal; Select Departure - Garmin GPS 400W Pilot's Manual & Reference

ng the orgnal flght plan untl cleared for the
approach—but, keeps the approach avalable
for quck actvaton when needed.
5. For approaches not approved for GPS, a
remnder wndow wll appear ndcatng that
GPS gudance on such approaches s strctly
for montorng only. To confirm ths remnder,
hghlght "Yes?" and press ENT.
Select Arrival
Select Arrival? allows you to select a published
standard terminal arrival route (STAR) for the destina-
tion airport, or replace the current arrival with a new
selection.
To select an arrival for a direct-to or flight plan
destination airport:
1. Select the "Select Arrval?" opton from the
actve flght plan page optons and press
ENT.
2. A wndow wll appear lstng the avalable
transtons for your destnaton arport. Turn
the small right knob to hghlght the desred
transton waypont and press ENT.
3. A second wndow wll appear lstng avalable
runways for the transton. Turn the small
right knob to hghlght the desred runway
and press ENT.
Wth "Load?" hghlghted, press ENT.
4.

Select Departure

Select Departure? allows you to select a pub-
lished standard instrument departure (SID) for the
departure airport, or replace the current departure
with a new selection. When using a direct-to, the
400W-series will use the nearest airport as a reference
when displaying available departures. See Sec 5 - Pro-
cedures for information on selecting departures using
the PROC key.
To select a departure for the departure airport:
1. Select the "Select Departure?" opton from
the actve flght plan page optons and press
ENT.
2. A wndow wll appear lstng the avalable
departures for your departure arport. Turn
the small right knob to select the desred
departure and press ENT.
3. A second wndow wll appear lstng avalable
transtons for the departure. Turn the small
right knob to hghlght the desred transton
waypont and press ENT.
Wth "Load?" hghlghted, press ENT.
4.
190-00356-00 Rev B
4 - FLIGHT PLANS
Active Flight Plan Options
75