Garmin GPS 400W Pilot's Manual & Reference page 107

approach course.
3. ATC nstructs you to turn left to a headng
of 025°. Ths places you parallel to the final
approach course n the opposte drecton. CDI
needle deflecton s to the left.
4. ATC nstructs you to turn rght to a headng of
115°.
5. ATC nstructs you to turn rght to a headng of
175° to ntercept the final approach course.
As you converge wth the fnal approach
course the needle moves toward the center.
(In the llustraton below, the needle has not
yet returned to the on-screen CDI, snce your
current poston s stll 1.9 NM rght of the final
approach course.)
6. As the CDI needle centers, make any reman-
ng course correctons to establsh yourself on
the final approach course. Vectors-To-Fnal
actvates the approach mmedately and gves
a 2° angular full scale deflecton all the way
to and beyond the FAF (up to 1 NM full-scale
deflecton).


7. As you approach the FAF, a waypont alert
n the lower rght corner ("RT TO 214° x S")
wll appear. Make any course adjustments
necessary for the final course segment (FAF to
MAP).
190-00356-00 Rev B
5 - PROCEDURES
Vectors-To-Final Approach



DO NOT USE FOR
NAVIGATION
97